Standard Fabric Air Distribution Duct Installation

1. Aircraft Type Cable (7x7)   5. Cable Clamps
 
2. Metal Grommets and 'S' Hooks
Option - Metal or Plastic Snap Hooks attached to the fabric duct
  6. Turnbuckle
Turnbuckle can be installed on the front, middle or end of the cable run.
 
3. Fabric Air Distribution Duct   7. Worm Gear Type Banding Clamp
Used to secure the fabric duct to the metal discharge outlet.
 
4. Diffusion Outlets
Hole diameter, spacing and location designed to meet specific customer requirements.
  
8. Metal Discharge Outlet
Metal discharge length should be 2-2 1/2 x fabric duct diameter.

Drawing not to scale